Website Launch -AntennaHome

Summary

AntennaHome is now online: 117 antennas, RF cable assemblies and coaxial connectors covering 13.56 MHz to 10.6 GHz across 15 product lines, each with a downloadable datasheet and a 300 MHz-10 GHz in-house 3D test chamber behind it.

AntennaHome is online. This site is our full catalogue of radio antennas, RF cable assemblies and coaxial connectors — built so you can find the right part by frequency band, connector and form factor in a couple of clicks, and pull the datasheet without asking anyone first.

Why we built it

Antenna selection is mostly a filtering problem. You know your band, your enclosure and your connector; what you need is the short list of antennas that fit, with real numbers attached. That is what every page here is organised around: measured frequency range, gain, VSWR, connector type and mounting style, each with its own datasheet link.

What we focus on

We design and manufacture antennas for licensed and unlicensed wireless devices, from short-range sub-GHz links to 5G data terminals. Coverage currently spans 13.56 MHz to 10.6 GHz across 117 models in 15 categories:

Product lineModelsTypical application
ISM 315 / 433 / 868 / 915 MHz antenna15Metering, remote control, alarm panels, garage and gate openers
WiFi / BLE / Zigbee 2.4 GHz antenna13Gateways, smart-home devices, wearables, mesh nodes
GPRS / 3G WCDMA / 4G LTE / 5G antenna20Industrial routers, vehicle trackers, vending and POS terminals
5G SA / NSA antenna35G CPE and high-throughput gateways
NB-IoT / Cat.1 / eMTC antenna3LPWAN meters, asset tracking, battery devices
GPS / BeiDou / GLONASS GNSS antenna10Positioning, timing and navigation
LoRa / UWB / RFID 915 MHz antenna16LPWAN nodes, real-time locating, RFID readers
Waterproof outdoor antenna2Pole and rooftop installations, IP-rated enclosures
Embedded SMD chip antenna5Board-level designs with no external element
RF cable assembly6Pigtails and extension leads with specified connector ends
RF connector SMA / SMB / MCX / IPX5Interconnect between board and antenna
FPV drone antenna5Air-side and ground-side video links
TV / DTMB VHF-UHF antenna4Digital terrestrial broadcast reception
Walkie-talkie VHF/UHF antenna7Two-way radio and PMR equipment
Customized design3OEM programmes built to a specified enclosure and band

Cables and connectors are part of the match

The link budget does not stop at the antenna port. Cable loss eats EIRP, and the wrong connector interface turns a clean design into an adapter stack. That is why the catalogue carries RF cable assemblies and SMA / SMB / MCX / IPX connectors alongside the antennas themselves — you can specify the whole RF path in one place.

Measured before it ships

Every design is characterised on our own 3D antenna test chamber:

  • Near-field test method
  • Frequency range 300 MHz – 10 GHz
  • Maximum device under test: 50 cm / 10 kg
  • Typical dynamic range 40 dB

Download the product catalogue for the full selection guide, or open any product page for its individual datasheet.

How to find what you need

Start from the category that matches your radio technology, then narrow by connector and mounting style. If your enclosure is unusual, or you need a band combination that is not listed, send us the mechanical drawing and target bands through the enquiry form — this is how most custom programmes start.

Frequently Asked Questions

What frequency range do your antennas cover?
From 13.56 MHz up to 10.6 GHz. Sub-GHz ISM bands (315 / 433 / 868 / 915 MHz), 2.4 GHz WiFi-BLE-Zigbee, cellular bands from GSM/GPRS through LTE and 5G, and GNSS bands for GPS, BeiDou and GLONASS are all in the catalogue.
Are datasheets available without contacting you?
Yes. Each product page links its own datasheet PDF, hosted on our documentation site, so you can download it directly. Full-antenna measurement data sheets are the exception — ask through the enquiry form when you need them.
Do you make only external antennas?
No. The range covers external whips and domes, embedded SMD chip antennas for board-level integration, and onboard 2.4 GHz antenna designs with reference dimensions and PCB layout files.
Can I buy cables and connectors separately?
Yes. RF cable assemblies and SMA / SMB / MCX / IPX connectors are listed as their own categories, so the pigtail or panel-mount connector can be ordered with the antenna or on its own.
What if none of the standard antennas fits my enclosure?
Use the enquiry form on any product page with your target bands, available ground-plane size and connector preference. Customised design covers everything from a re-tuned radiating element to a completely new mechanical package.
What is the minimum order quantity and lead time?
Standard models ship in 7–15 working days after order confirmation; samples of in-stock models can ship within 3 days. MOQ depends on the model — contact us for the exact figure for your part number.
Can AntennaHome customize an antenna for my device?
Yes. We provide customized design including frequency tuning, connector and cable length, housing and mounting method. Send us your enclosure drawing, available ground plane size and target bands, and our RF engineers will propose a design.
What certifications and test reports are available?
Products are RoHS and REACH compliant. We operate an in-house 3D anechoic chamber and can provide VSWR, gain and radiation pattern test reports for the specific part number you order.

Request a Quote or Sample

We reply within one business day. Or email us directly.